published date : apr 28, 2006 drawing no : sdsa1502 v5 checked : b.l.liu p.1/5 part number: SBBEMDBG99W 5.0x6.0mm full color led lamp www .sunled.com notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. part number emitting color emitting material lens-color luminous intensity (if=30ma *50ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. SBBEMDBG99W blue ingan water clear 110 248 465 100 red ingaalp *380 *497 640 green ingan 180 347 520 note: * luminous intensity with asterisk is measured at 50ma. features outstanding material efficiency. reliable and rugged. water clear lens. low power consumption. one blue , one orange and one green chips in one package. can produce any color in visible spectrum, including white light. moisture sensitivity level : level 4. rohs compliant. absolute maximum ratings (t a =25c ) bb-e (ingan) md (ingaa lp) bg (ingan) unit reverse voltage v r 5 5 5 v forward current i f 30 50 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 160 185 150 ma power dissipation p t 350 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 electrostatic discharge threshold (hbm) v lead solder temperature [2mm below package base] 260c for 3 seconds lead solder temperature [5mm below package base] 260c for 5 seconds 1000 1000 bb-e (ingan) unit forward voltage (typ.) (i f =20ma) v f 3.7 v forward voltage (max.) (i f =20ma) v f 4.3 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 465 nm wavelength of dominant emission (typ.) (i f =20ma) d 470 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 25 nm capacitance (typ.) (v f =0v, f=1mhz) c 110 pf operating characteristics (ta=25c ) ) ) ) md (ingaa lp) 1.9 2.5 10 640 628 27 45 bg (ingan) 3.5 4.5 10 520 525 38 45 attention observe precautions for handling electrostatic discharge sensitive devices
published date : apr 28, 2006 drawing no : sdsa1502 v5 checked : b.l.liu p.2/5 part number: SBBEMDBG99W 5.0x6.0mm full color led lamp www .sunled.com bb-e
published date : apr 28, 2006 drawing no : sdsa1502 v5 checked : b.l.liu p.3/5 part number: SBBEMDBG99W 5.0x6.0mm full color led lamp www .sunled.com md
published date : apr 28, 2006 drawing no : sdsa1502 v5 checked : b.l.liu p.4/5 part number: SBBEMDBG99W 5.0x6.0mm full color led lamp www .sunled.com bg
published date : apr 28, 2006 drawing no : sdsa1502 v5 checked : b.l.liu p.5/5 part number: SBBEMDBG99W 5.0x6.0mm full color led lamp www .sunled.com remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
|
